(Your shopping cart is empty)

  Home > All Wheel Kits >

Arctic Cat Procross, Proclimb, XF 4th wheel kit
Alternative Views:

Our Price: $119.95

Product Code: PCWK-REAR


Wheel Color:

Wheel Size

J & T Products is proud to offer this quality 4th Wheel Kit for your 2012 - 2018 Arctic Cat & Yamaha model snowmobiles. This kit DOES NOT fit the Snopro 500 & 600, 2015 ZR6000RXC, ZR6000RR Tucker Hibbert models or all of the 2013 RR models. Go to the Snopro 500 & 600 wheel kit for your application.

This 4th Wheel Kit will take 50% of the load from the 2 inner rear wheels. It is a known fact that there are problems with the stock inner rear wheels. If there is a wheel failure with either of the stock wheels, your sled will no longer be rideable. With this wheel kit in place, you can continue to ride. Another benefit is that it keeps full support across the entire width of the track to prevent catwalking (veers left or right under hard acceleration). One more benefit after installing the wheel kit is that it is easy to check track alignment just by looking at the distance between the edge of track and the outer wheels. The distance should be the same on both sides, if not adjust accordingly. The wheel kit also gives your sled a complete look with rear outside wheels.
This J & T kit is made with high quality parts and materials, starting with a 6061 grade aluminum spacers. The J & T spacers are a larger diameter than those of its competitors to allow for a more stable and stronger contact area. All of the bolts & washers are zinc plated to prevent corrosion. The spoked wheels offered in the kits are a genuine Arctic Cat product. The 7.120 inch diameter wheels are available in black, red, green, white, blue & orange. 8 inch wheels are also available in colors black, red, blue and green. Installation is quick and easy and should take about 15 minutes to install.

128" and 129" track models use the 7.120 diameter wheels
137" and longer track models use the 8.00 diameter wheels

Spacers & hardware maybe purchased without wheels for $55.95, plus shipping. Please contact our office at 810-545-0066 to place this order. Thank you.
As always, J & T Products offers a lifetime warranty on all hardware. (excludes wheels, bearings & bolts)
  • Two CNC machined aluminum wheel spacers.
  • Zinc plated axle bolts.
  • Two Arctic Cat spoked wheels available in 7.120 inch or 8 inch diameter.
  • Two center trim caps for wheels.
  • Wheel colors available:
    7.120 - green, black, red, orange, blue & white.
    8.00 - green, black, red, blue & white
  • Comes with easy to install instructions.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

All Wheel Kits